Existing Ceiling grid, need to cut (demo) new openings / holes. best way to accomplish...?
Go to the following link to set up the ceiling grid demolition pattern, not native to Revit as a default.
(Thanks to Doug at this blogpost for sharing)
http://aectechtalk.wordpress.com/2010/08/16/display-of-demolished-ceilings-in-revit/
1. Cut holes in existing ceiling there are three ways to accomplish this, of the three below I recommend drawing the new openings inside the ceiling boundary.
Note:
_Shaft Opening can be set as a new element while creating a NEW cut in an existing element. There is the benefit of being able to move / resize it independently of the ceiling boundary while tweaking the design. An issue I noticed is that it is not visible in a view set as an existing or demolition phase.
_Vertical Opening - good to use in an existing ceiling with existing openings or floors (single cut) since it assumes the Phase of the host element and cannot be changed.
_Another option is to just draw the opening in the ceiling boundary - I might use this for an existing opening that I'm fairly sure won't be changing for the project.
_Either one you use you have to manually draw in the ceiling to be depicted for demolition and self manage their locations, move an opening then move the infill grid. (maybe they can be locked together...?).
2. Draw in separate demo'd ceiling with new type (per instructions at link above).
3. In order to move together, Group if desired.
4. If copying openings and ceilings around, remember to set the ceiling phasing for the copied elements.
